快速卷帘门在使用时应注意的问题

1、 When installing fast rolling shutter doors, it is necessary to hire installation personnel for installation. Generally, manufacturers provide corresponding installation services, and these items must be confirmed with the manufacturer before purchase. This is convenient for us to solve any problems that arise in the future in a timely manner.

二、在安装人员安装布线时，必须要依照建筑施工标准及电气标准来进行，线径要不低于1.5MM，同时，电源线接到有接地的插座上，严禁去除电源线上的接地引线。这样保用电，可以让我们避免一些不必要的担心。

2、 When installing wiring, installation personnel must comply with building construction standards and electrical standards, with a wire diameter of no less than 1.5mm. At the same time, the power cord should be connected to a grounded socket, and it is strictly prohibited to remove the grounding lead from the power cord. This way of ensuring electricity safety can help us avoid unnecessary worries.

三、快速门安装调试后，门体运行需要检查是否顺畅，运行中不会出现卡滞现象。同时，开门机需要安装在带有平衡弹簧、性能良好的门体上，这样以免造成开门机超载，出现损坏。门体导轨末端应加装机械限位装臵或缓冲助推器，以防门体滑出。这些方面的注意可以让快速卷帘门更加的快速运行。

3、 After the installation and debugging of the fast door, it is necessary to check whether the door body runs smoothly and there will be no jamming during operation. At the same time, the door opener needs to be installed on a door body with a balance spring and good performance to avoid overloading and damage to the door opener. Mechanical limit devices or buffer boosters should be installed at the end of the door guide rail to prevent the door from sliding out. These aspects of attention can make the fast rolling shutter door operate more quickly and safely.

四、控制箱应该固定人员容易操作的地方，并且，距离地面不宜太高，也不可以太低，适合的高度一般来说1.4米左右就可以了。这样就既可以很好的避免儿童随意触碰，并且又在工作人员容易操作的高度。日常的高速门运行控制，如手柄这类小物件，要*人员专人保管，以免遗失。这样方便以后有什么问题可以得到很好的，以免出现问题推卸责任。

4、 The control box should be fixed in a place that is easy for personnel to operate, and should not be too high or too low from the ground. The suitable height is generally around 1.4 meters. This can effectively prevent children from touching them at will and at a height that is easy for staff to operate. Daily high-speed door operation control, such as small items such as handles, should be kept by dedicated personnel to avoid loss. This is convenient for solving any problems in the future, so as to avoid shirking responsibility for any problems.

五、高速门门体运行时，行人、车辆不可以从门体下方通过或是在下方停留，以防发生意外事故。快速卷帘门出现故障时，需要及时修理，*步是切断电源，然后再确定门体是否没有坠落危险，检查完这些之后，后再去找人员来进行维修。这些步骤一定不能乱，一步一步的进行，这样也可以避免不的事情发生。

5、 During the operation of the high-speed door body, pedestrians and vehicles are not allowed to pass through or stay below the door body to prevent accidents. When there is a malfunction in the fast rolling shutter door, it needs to be repaired in a timely manner. The first step is to cut off the power supply, and then confirm whether the door body is not in danger of falling. After checking these, find personnel for repair. These steps must not be disorderly and carried out step by step, which can also prevent unsafe things from happening.

本文来自：济南防火卷帘门安装维修更多的内容请点击：http://www.jnyuqilin.com我们将会为您提问的问题提供一个满意的服务，欢迎您的来电！

This article comes from: Installation and maintenance of Jinan fireproof rolling shutter doors. For more information, please click on: http://www.jnyuqilin.com We will provide a satisfactory service for the questions you ask. Welcome to call us!