济南车库门：车库遥控器怎么配对?

来源：http://www.jnyuqilin.com/  发布时间：2024-05-13 16:18:49

　　车库遥控器怎么配对?

How to pair the garage remote control?

　　1、准备的新车库门遥控器的型号要跟旧的车库遥控器一样;

1. The model of the new garage door remote control prepared should be the same as the old garage remote control;

　　2、新车库门遥控器上面的两个按键同时按住，看到遥控器上的红灯一直在闪动的时候，就可以松开按键了，这说明清码成功了;

2. Press and hold the two buttons on the new garage door remote control at the same time. When you see the red light on the remote control flashing continuously, you can release the button, which indicates successful code clearing;

　　3、把新旧车库门遥控器放在一起，并且同时按下同一个位置的按键，如果看到遥控器上的红灯闪动了，那就表面这个按键已经跟新的遥控器匹配成功了，就可以松开两个遥控器的按键;

3. Place the new and old garage door remote controls together, and simultaneously press the button in the same position. If you see the red light flashing on the remote control, it indicates that the button has been successfully matched with the new remote control, and you can release the buttons on both remote controls;

　　4、如果匹配的时候，按下按键指示灯只是亮了一下就不亮了，这表面没有匹配成功，要重新再匹配一次;

4. If the indicator light only lights up once when pressing the button during matching, it does not appear to be successful and needs to be matched again;

　　5、按照这个方法把剩余的车库门遥控器逐一匹配。

5. Follow this method to match the remaining garage door remote controls one by one.

　　如何配遥控车库门遥控器?

How to equip a remote control garage door remote control?

　　1、按住1到2秒电机后方的开门机对码键，指示灯会一直亮着;

1. Press and hold the door opening machine code key behind the motor for 1 to 2 seconds, and the indicator light will remain on;

　　2、按下车库门遥控器上的开门键，每按一次遥控器跟开门机的指示灯都会亮起，连续按4次，4次都同时亮指示灯，那就说明对码成功了;

2. Press the door open button on the garage door remote control, and the indicator lights of the remote control and door opener will light up every time you press them. Press them continuously for 4 times, and the indicator lights will light up simultaneously for 4 times, indicating that the code matching has been successful;

　　3、对码成功之后，开门机的指示灯会熄灭，如果指示灯还在亮，这就说明开门机还是处于对码的状态，所以在完成对码之后，要再次按一下电机后方的开门机对码键来退出对码。

3. After successful code matching, the indicator light of the door opener will turn off. If the indicator light is still on, it indicates that the door opener is still in the code matching state. Therefore, after completing the code matching, press the door opener code matching button behind the motor again to exit the code matching.

本文由  济南车库门 为您精心提供，如想了解更多请点击我们的网站：http://www.jnyuqilin.com，我们将会以的热情为您解答!

This article is carefully provided by Jinan Garage Door. If you want to learn more, please click on our website: http://www.jnyuqilin.com We will answer you with the greatest enthusiasm!