您好,欢迎访问济南爱窗加工部 的网站!
客户服务热线:13296405222

地址:济南市天桥区天桥东街后陈家楼31号

联系我们
济南爱窗加工部

联系人:孟经理

联系电话:13296405222

网址:http://www.jnyuqilin.com

地址:济南市天桥区天桥东街后陈家楼31号

济南车库门:车库门弹簧上紧方法有哪些?

来源:http://www.jnyuqilin.com/  发布时间:2024-05-24 20:06:01

  一、准备工具

1、 Prepare tools

  上紧车库门弹簧需要准备的工具有两根梯子、手套、两只扳手、螺丝刀和弹簧拉伸器等。其中弹簧拉伸器是必备工具,因为车库门弹簧的张力很大,操作时需要使用弹簧拉伸器保证。

The tools required to tighten the garage door spring include two ladders, safety gloves, two wrenches, a screwdriver, and a spring tensioner. Among them, a spring stretcher is a necessary tool because the tension of the garage door spring is high, and a spring stretcher is needed to ensure safety during operation.

  二、调整步骤

2、 Adjustment steps

  1. 关闭车库门

1. Close the garage door

  在调整弹簧之前需要先关闭车库门,解除门扣,确保门能够自由启闭。

Before adjusting the spring, it is necessary to close the garage door, release the door latch, and ensure that the door can open and close freely.

  2. 确定弹簧类型

2. Determine the type of spring

  根据车库门的型号和尺寸,确认车库门所用的弹簧类型。通常车库门弹簧主要分为扭簧和伸簧两种,它们的形状和大小不同,操作方法也不同。

20210319023536685

Confirm the type of spring used for the garage door based on its model and size. Usually, garage door springs are mainly divided into two types: torsion springs and extension springs, which have different shapes and sizes, and different operating methods.

  3. 拆卸卡片

3. Disassemble the safety card

  在调整扭簧弹簧之前需要先拆卸卡片,将扭簧弹簧固定在轴上。然后使用扳手松开螺丝,取下调整扭簧弹簧的杆子。

Before adjusting the torsion spring, it is necessary to remove the safety card and fix the torsion spring on the shaft. Then use a wrench to loosen the screw and remove the rod that adjusts the torsion spring.

  4. 调整弹簧

4. Adjust the spring

  根据需要,使用弹簧拉伸器逐渐调整弹簧张力,直到杆子可以没有压力地拧入。注意,弹簧拉紧的过程需要慢慢来,不能一次性过度拉紧,以防止弹簧断裂。

As needed, use a spring tensioner to gradually adjust the spring tension until the rod can be screwed in without pressure. Note that the process of tightening the spring needs to be gradual and should not be overly tightened at once to prevent the spring from breaking.

  5. 固定弹簧

5. Fixed spring

  调整弹簧张力后,使用扳手紧固螺丝,确保弹簧杆子稳定地固定在轴上。然后把卡片和门扣重新安装到车库门上。

After adjusting the spring tension, use a wrench to tighten the screws and ensure that the spring rod is firmly fixed on the shaft. Then reinstall the safety card and door latch onto the garage door.

以上是关于 济南车库门 的介绍,若想了解相关知识可请点击:http://www.jnyuqilin.com 我们将会全心全意为您提供满分服务,欢迎您的来电!

The above is an introduction to garage doors in Jinan. If you want to learn more about related knowledge, please click: http://www.jnyuqilin.com We will wholeheartedly provide you with full score service. Welcome to call us!