电动卷帘门要确认哪些事项？

Prepare installation tools. Operators should prepare tools and accessories such as welding machines, hammers, electric drills, ladders, drill bits, cutting heads, leveling rods, screwdrivers, etc.

确定电动卷帘门安装尺寸大小。作业人员在门框的位置画出线条，确定好电动卷帘门的大小，然后，让施工人员定做出合适尺寸的电动卷帘门，通常，电动卷帘门的高度要略高于门框。

Determine the installation size of the electric roller shutter door. The operator draws lines at the position of the door frame, determines the size of the electric rolling shutter door, and then has the construction personnel make a suitable size electric rolling shutter door. Generally, the height of the electric rolling shutter door should be slightly higher than the door frame.

确定水平线，根据现场情况来设定尺寸。作业人员在卷帘门侧板的洞口上方50厘米处，使用水平尺画出一条水平线;然后，在卷帘门的侧板跨出洞口13厘米处，使用水平尺画下一条垂直线;再把副板跨出门框的9厘米处，画出一条垂直线;将侧板固定在垂直线上，将侧板的处画上一条水平线。

Determine the horizontal line and set the size based on the on-site situation. The operator draws a horizontal line 50 centimeters above the opening of the side panel of the rolling shutter door using a level ruler; Then, use a horizontal ruler to draw a vertical line 13 centimeters above the opening on the side panel of the roller shutter door; Step the secondary panel 9 centimeters out of the door frame and draw a vertical line; Fix the side panel on a vertical line and draw a horizontal line at the highest point of the side panel.

作业人员将电机固定在主板上，再使用链条将轮盘和电机底座连接，把遥控线盒装置和电机相连接，测试卷帘门的手柄是否颠倒，如果电动卷帘门的遥控接收盒颠倒，则需要拨动内置的黑色按键。

The operator fixes the motor on the motherboard, then uses a chain to connect the wheel and motor base, connects the remote control cable box device to the motor, and tests whether the handle of the roller shutter door is reversed. If the remote control receiver box of the electric roller shutter door is reversed, the built-in black button needs to be moved.

电动卷帘门焊接牢固。电动卷帘门确定尺寸合适之后，将其与转轴焊接牢固，让焊接的钻头打孔保持垂直。作业人员检查电动卷帘门的电源工作是否正常，将卷帘门的轨道拉成人字，将卷帘门调成水平，确定上下水平线位置准确，再使用螺丝杆将帘子升上去。

The electric roller shutter door is firmly welded. After determining the appropriate size of the electric roller shutter door, weld it firmly with the rotating shaft to ensure that the welded drill bit is drilled vertically. The operator checks whether the power supply of the electric roller shutter door is working properly, pulls the track of the roller shutter door into a straight line, adjusts the roller shutter door to a horizontal position, determines the accurate position of the upper and lower horizontal lines, and then uses a screw rod to lift the curtain up.

第六步：检查与测试。作业人员打开电源之后，拉动电动卷帘门的开关，进行升降演示操作，确保其不会出现失灵等情况，从而造成事故的发生。作业人员确定电动卷帘门的轨道通畅、洁净，按钮不会出现反弹失灵等问题。

Step 6: Inspection and testing. After turning on the power, the operator pulls the switch of the electric roller shutter door to perform a lifting demonstration operation, ensuring that it does not malfunction or cause safety accidents. The operator confirms that the track of the electric roller shutter door is unobstructed and clean, and the buttons will not rebound or malfunction.

本文的精彩内容由济南电动卷帘门安装维修提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://www.jnyuqilin.com我们有专门的客服为您解答问题

The exciting content of this article is provided by the installation and maintenance knowledge of Jinan electric roller shutter doors. There are also many exciting content on this website, and you can click to enter more content: http://www.jnyuqilin.com We have dedicated customer service to answer your questions