A layer of special architectural paint has been rubbed on the surface of the roller shutter door, which makes it possible for them to guarantee and secure the safety in production on the premise of beautiful and generous decoration. What should we pay attention to when installing roller shutter doors? Next, Jinan Rolling Door Factory will explain seven o'clock.
1. The door frame of the rolling shutter door can be fixed with the wall by expansion screws, or iron parts can be embedded in the wall at the hole edge, and welded firmly with the door frame connector during installation.
2. The rolling shutter door shall be installed in a suitable way according to the type of fire door used.
3. When installing the roller shutter door, it should be straightened and hoisted. After the specification and quantity are appropriate, it should be temporarily fixed, calibrated and adjusted. After it is confirmed that there is no error, it can also be anchored with the connecting reinforcement.
4. No matter which interface mode is used between the door frame and the wall, each side should not be less than 3 anchor points, and should be firmly connected.
5. Electric mortise locks must be installed on roller shutter doors and sequencers must be installed on double doors.
6. It is stipulated that the sliding door shall be flexible after the installation of the rolling shutter door, the sliding door shall be easy to open and firm to close.
7. Hardware accessories such as door handle and fire lock in rolling shutter door must be complete.
The above are common problems in the installation of roller shutter doors. I hope it can help you. The installation of roller shutter doors must be carried out in a comprehensive way with appropriate spare parts. In addition, it should also be understood by integrating the characteristics of commodity specifications, dimensions and materials. Follow us http://www.jnyuqilin.com/ , learn more about it!