电动门与墙体的连接方法有哪些？

1、门窗可以用固定钢板(或燕尾铁脚)的金属膨胀螺栓与砖墙连接。严禁用钉子在砖墙上固定门窗。与钢筋混凝土墙一样，当使用固定钢板时，应使用水泥砂浆缝缝缝隙。用聚氨酯泡沫密封剂或其他柔性材料填充间隙时，应用燕尾铁脚固定。

 

1. Doors and windows can be connected with brick wall by metal expansion bolts of fixed steel plate (or swallow tail iron foot). It is strictly forbidden to fix doors and windows on brick walls with nails. As with reinforced concrete walls, when fixed steel plates are used, cement mortar shall be used to sew the gaps. When the gap is filled with polyurethane foam sealant or other flexible materials, it is fixed with swallow tail iron feet.

 

2、门窗与钢筋混凝土墙之间的连接可以采用固定钢板(或燕尾铁脚)、射钉或金属膨胀螺栓。固定门窗采用固定钢板连接时，周围框架与门窗墙体之间的缝隙也应采用水泥砂浆填充。水泥砂浆塞缝能使门窗外框牢固可靠地与墙体连接，对门窗外框材料的加固起到重要作用。电动伸缩门厂家建议当用聚氨酯泡沫密封剂或其他柔性材料填充缝隙时，固定钢板应更换燕尾铁脚，以保证门窗连接的可靠性。

 

2. The connection between doors and windows and reinforced concrete wall can adopt fixed steel plate (or swallow tail iron foot), shooting nail or metal expansion bolt. When the fixed doors and windows are connected with fixed steel plates, the gap between the surrounding frame and the walls of doors and windows should also be filled with cement mortar. Cement mortar caulking can make the door and window frame firmly and reliably connected with the wall, and plays an important role in the reinforcement of the door and window frame materials. The electric telescopic door manufacturer suggests that when the polyurethane foam sealant or other flexible material is used to fill the gap, the fixed steel plate should be replaced with the swallow tail iron foot to ensure the reliability of the door and window connection.

 

3、钢架适用于门窗与各种墙体的连接。安装精度高，连接可靠，但成本高。燕尾铁脚与预埋件的焊接连接方法，适用于门窗与轻墙的连接。燕子尾铁脚及预埋件采用钢筋或角码焊接调整。燕尾铁脚焊法可用于门窗与钢结构的连接。燕尾铁脚与钢结构之间的连接是用钢筋或角钢焊接来调整的。

 

5.jpg

 

3. The steel frame is suitable for the connection of doors, windows and various walls. The installation precision is high, the connection is reliable, but the cost is high. The welding connection method of swallow tail iron foot and embedded parts is suitable for the connection of doors and windows and light wall. The swallow tail iron feet and embedded parts are welded and adjusted by steel bar or corner code. Swallow tail iron foot welding method can be used to connect doors and windows with steel structure. The connection between dovetail iron foot and steel structure is adjusted by welding steel bar or angle steel.

 

1、制定保养计划，及时清理电动伸缩门的轨道，保持内部清洁，但轨道表面不能加油，保持轨道运行畅通。伸缩门电机和传动链条表面的灰尘需及时清理，并注意添加润滑油。检查控制箱内器件和开关控制盒，紧固接线端子，清洁控制箱内、表面和按钮上的灰尘污物。

 

1. Make a maintenance plan, clean the track of the electric telescopic door in time, keep the inside clean, but the surface of the track can not be refueled to keep the track running smoothly. The dust on the surface of the motor and drive chain of the telescopic door shall be cleaned in time, and the lubricating oil shall be added. Check the components in the control box and switch control box, fasten the wiring terminals, and clean the dust and dirt in the control box, on the surface and on the button.

 

2、注意经常检查伸缩门上下行程开关，对滑轨加润滑油，另外提醒操作人员手动控制伸缩门，检查器运行情况，听证上下行程开关位置，使电动伸缩门开启或关闭时处于适当位置，且检查过程中严防伸缩门冲顶或冲底。

 

2. Pay attention to frequently check the up and down travel switch of the telescopic door, add lubricating oil to the slide rail, and remind the operator to manually control the telescopic door, check the operation of the device, and check the up and down travel switch position, so as to make the electric telescopic door in a proper position when it is opened or closed, and strictly prevent the telescopic door from rushing to the top or bottom during the inspection.

 

以上的精彩内容来自：济南电动卷帘门安装维修详细的内容请点击进入我们的网站进行查询对接：http://www.jnyuqilin.com

 

The above wonderful content comes from: Jinan electric roller shutter door installation and maintenance. For details, please click to enter our website for query and docking: http://www.jnyuqilin.com