防火卷帘门导轨的7步安装

卷帘门及防火卷帘门的安装必须由的卷帘门厂家师傅来操作，正常在厂家购买都会包安装和售后维修卷帘门这一块服务项目，下面和济南防火卷帘门安装维修厂家一起来了解喜爱防火卷帘门导轨的7步安装。

The installation of rolling shutter doors and fire resistant rolling shutter doors must be operated by professional rolling shutter door manufacturers. Normally, the installation and after-sales maintenance of rolling shutter doors will be included in the service items purchased by the manufacturer. Below, let's learn about the 7-step installation of the preferred fire resistant rolling shutter door guide rail with the Jinan fire resistant rolling shutter door installation and maintenance manufacturer.

1.防火卷帘帘板或帘面嵌入导轨的深度应符合表下表的规定。导轨间距大于下表的规定时，导轨间距每增加1000mm，每端嵌入深度应增加10mm，且卷帘安装后不应变形。

1. The depth of the fireproof roller shutter panel or curtain surface embedded in the guide rail should comply with the regulations in the table below. When the distance between the guide rails is greater than the provisions in the table below, for every 1000mm increase in the distance between the guide rails, the embedding depth at each end should be increased by 10mm, and the roller shutter should not deform after installation.

2.导轨顶部应成圆弧形，其长度应保证卷帘正常运行。

2. The top of the guide rail should be in a circular arc shape, and its length should ensure the normal operation of the roller shutter.

3.导轨的滑动面应光滑、平直。帘片或帘面、滚轮在导轨内运行时应平稳、顺畅，不应有碰撞和冲击现象。

3. The sliding surface of the guide rail should be smooth and straight. The curtain, curtain surface, and roller should run smoothly and smoothly within the guide rail, without any collision or impact.

4.单帘面卷帘的两根导轨应互相平行，双帘面卷帘不同帘面的导轨也应互相平行，其平行度误差均不应大于5mm。

4. The two guide rails of a single curtain roller shutter should be parallel to each other, and the guide rails of different curtain surfaces of a double curtain roller shutter should also be parallel to each other, and their parallelism error should not exceed 5mm.

5.卷帘的导轨安装后相对于基础面的垂直度误差不应大于1.5mm/m，全长不应大于20mm。

5. After installation, the verticality error of the guide rail of the roller shutter relative to the foundation surface should not exceed 1.5mm/m, and the total length should not exceed 20mm.

6.卷帘的防烟装置与帘面应均匀紧密贴合，其贴合面长度不应小于导轨长度的80%。

6. The smoke prevention device of the roller shutter should be evenly and tightly fitted to the curtain surface, and the length of the fitting surface should not be less than 80% of the length of the guide rail.

7.防火卷帘的导轨应安装在建筑结构上，并应采用预埋螺栓、焊接或膨胀螺栓连接。导轨安装应牢固，固定点间距应为600-1000mm。

7. The guide rail of the fireproof roller shutter should be installed on the building structure and connected with embedded bolts, welding or expansion bolts. The installation of the guide rail should be firm, and the spacing between fixed points should be 600-1000mm.

防火卷帘门导轨的安装事项就讲解到这里了，希望能够给您好的帮助，更多事项就来我们网站http://www.jnyuqilin.com咨询！

That's all for the installation of the guide rail for the fireproof rolling shutter door. I hope it can be helpful to you. For more information, please come to our website http://www.jnyuqilin.com consulting service