The popularization of transportation means has made people's requirements for travel increasingly high. Many people have purchased various types of cars, and the parking of cars is worth considering. Garage is a choice for some people, and garage doors, as anti-theft and windproof devices, may have some problems. So what are the common faults and maintenance methods for garage doors? Jinan garage door installation and maintenance personnel analyze for you:
1、 Common faults of garage doors
1. Remote control cannot open the garage door drive device normally
2. The garage door cannot be fully closed if it is not tightly closed, or the garage door cannot be fully opened.
3. The remote control of the garage door is malfunctioning and must be placed very close before it can be used.
4. The garage door makes excessive noise during opening and closing.
5. During the process of opening the garage door, the garage door body collides with the travel switch.
6. The remote control of the garage door is ineffective but can be opened using a manual switch.
2、 Common fault maintenance
1. The remote control of the garage door cannot open the garage door drive device normally. (Garage door manual switch device failure) Garage door remote control failure repair method: Check the socket, plug, manual switch, fuse of the fuse, check the wiring of the manual switch and remote control receiver board, reposition the travel switch to increase travel.
2. The remote control of the garage door is malfunctioning and must be placed very close before it can be used. The repair method for the garage door remote control is to extend the antenna to the outside of the garage, extend the antenna out of the driver and straighten it, and replace the battery.
3. The operation noise of the automatic garage door is too loud during the opening and closing process. The maintenance method for the garage door is to strengthen the hardware and adjust the driving device lever above the centerline of the door body.
4. The automatic garage door cannot be fully closed if it is not tightly closed, or if the automatic garage door is not fully opened, the garage door can be opened and closed. Repair method: Reposition the travel switch to increase the travel.
5. During the opening process of the garage door, the garage door body collides with the travel switch. Maintenance method: Check the travel switch and its wiring.
6. The remote control of the automatic garage door fails, but it can be opened using a manual switch. Repair method for remote control failure of garage door: follow the instructions to complete the code checking operation, replace the internal battery of the remote control, and ask the maintenance personnel to check the receiving control board.
That's all for the common faults and maintenance related content of the garage door. I hope you can be helpful. For more information, please come to our website http://www.jnyuqilin.com consulting service