After the roller shutter door has been used for a long time, in order to prolong its service life, many people will carry out anti-corrosion solutions for the roller shutter door, that is, spraying. So what are the common problems when the roller shutter door is sprayed? Let's see what the installation and maintenance technicians of Jinan electric roller shutter door say.
Features of roller shutter door
1. The rolling shutter door is durable, elegant, high toughness, high wear resistance and corrosion resistance.
2. Humanized design plan
In addition, there are 36 colors to choose from, and the key colors are milky white, dark gray and beige.
3. Available space in the installation room
The aluminum alloy profile roller shutter door is suitable for all installation holes. The roller shutter door is rolled on the installation hole and only occupies the indoor space with the height width ratio at the upper end of the hole.
4. Satisfactory noise reduction operation
The noise reduction operation of aluminum alloy profile roller shutter door leaves an unforgettable impression. The operation noise is reduced through the application of noise reduction operating system software in the door
5. The anti-theft function makes you comfortable
The rolling shutter door can avoid reasonable malignant theft. If the automatic anti prying device is installed on the rolling shutter door, the anti-theft characteristics of your garage rolling shutter door will be greatly improved
6. Simple operation
Reliable and balanced system software, solid drive equipment, delicate slide rails and flexible rollers make the door leaf easy and flexible to operate.
7. Lighting system software
The system software can be used for fully automatic, configured, lighting equipment. It has a deceleration function to extinguish. The deceleration can be set as required.
Function of roller shutter door during spraying
1. The anti-corrosive solution coating of roller shutter door shall meet the product quality standard of roller shutter door factory;
2. If the appearance of the roller shutter door is wet and cold, and there are various kinds of stains and dust, the cleaning will be relatively etched and coated before the roller shutter door is carried out;
3. After the anti-corrosive coating of the roller shutter door is solved, the construction site should not be exposed to the sun immediately, and the construction site should not be overheated, so as to prevent the coating from being applied asymmetrically on the curing material.
When the roller shutter door is applied, the surface of the roller shutter door can be decorated according to its own needs. There are different colors, patterns or textures to choose from, which are suitable for different occasions and more beautiful. It is also more environmentally friendly and will not cause any harm to the environment. Come to our website if you need http://www.jnyuqilin.com Consult!