您好,欢迎访问济南爱窗加工部 的网站!
客户服务热线:13296405222

地址:济南市天桥区天桥东街后陈家楼31号

联系我们
济南爱窗加工部

联系人:孟经理

联系电话:13296405222

网址:http://www.jnyuqilin.com

地址:济南市天桥区天桥东街后陈家楼31号

当前位置: 首页 > 新闻资讯 > 公司新闻

防火卷帘门如何进行限位调试?

来源:http://www.jnyuqilin.com/  发布时间:2019-12-27 11:57:17

钢制防火卷帘门厂家介绍到作业人员需求从头把卷帘门进行开关,检查卷帘门在开关的过程中是不是有疑问,假如有疑问的话,以便及时的进行更正。在调试的时候,卷帘门下面禁止站人,由于卷帘门的重量是很大的,假如卷帘门不受操控的话,就很简单对站在卷帘门下的人,形成很大的损伤。
 
The manufacturer of steel fireproof rolling shutter door introduces that the operator needs to open and close the rolling shutter door from the beginning. Check whether there is any doubt in the process of opening and closing the rolling shutter door. If there is any doubt, it can be corrected in time. When debugging, it is forbidden to stand under the rolling shutter door. Because the weight of the rolling shutter door is very large, if the rolling shutter door is not controlled, it is very simple to form great damage to the people standing under the rolling shutter door.
 
关于卷帘门电机调试,钢制防火卷帘门厂家介绍如下:
 
About the rolling shutter motor debugging, the manufacturers of steel fireproof rolling shutter door are introduced as follows:
 
对防火卷帘门电机调试前,应先松开限位组织的锁紧螺钉,然后用手拉动环形链,使卷帘离地面1米左右,先试“上”、“停”、“下”按键,调查卷帘门升、停、降各功用,是不是灵敏可靠,若正常即可将卷帘门上升或下降到您确定的方位后,旋动限位螺套,调整碰微动开关滚轮,听到“滴达”声后,拧紧锁紧螺钉,重复调试,使限位到达比较好的方位时,再将锁紧螺钉用手指用力旋紧即可。
 
Before debugging the motor of fireproof rolling shutter door, first loosen the locking screw of the limiting organization, and then pull the ring chain by hand to make the rolling shutter about 1m above the ground. First try the "up", "stop" and "down" buttons to investigate whether the rolling shutter door's functions of raising, stopping and lowering are sensitive and reliable. If it is normal, the rolling shutter door can be raised or lowered to the position you determine, and then rotate the limiting screw sleeve to adjust Touch the microswitch roller and hear the sound of "Dida", tighten the locking screw and repeat the debugging. When the limit reaches a better position, tighten the locking screw with fingers.
 
还需求留意调试防火卷帘门和电机的次数,一般来说,调试三到四次是比较合适的,可以较好的调查防火卷帘门的工作状况。
 
Also need to pay attention to the number of debugging fire shutter door and motor, generally speaking, debugging three to four times is more appropriate, can better investigate the working condition of fire shutter door.